Hammer Mill(Hammer Crusher)
The PC hammer crusher(Hammer Mill) crushes by the collisions between high-speed hammer and material, which features in its simple structure, high reduction ration, high efficiency, ect.. The PC hammer crushers were developed for the both dry and wet crushing of brittle, medium-hard materials for the mining, cement, coal, metallurgic, construction material, road building, and Petroleum & Chemical industries
Operating Principle Of Zenith Hammer Crusher:
The main working part of zenith hammer crusher is rotors with hammer. The rotors consist of main shaft, disk, pin shaft and hammers. The motor drives the rotors to rotate quickly in the crushing cavity. Raw materials enter the crusher through the feed opening and are stricken, impacted, cut and ground by the high-speed hammer to small size. There is a screening plate under the rotor, so that materials with size smaller than the screen mesh will be screened out and others are left to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the screening plate. The gap between the rotors and the screening plate can also be adjusted according to different requirement.
The Technical Data Of Zenith Hammer Crusher:
| Model | Feeding size (mm) | Output size (mm) | Capacity (t/h) | Moter | Weight (t) |
|
| Model | KW | |||||
| PCΦ400×300 | ≤200 | ≤25 | 8-15 | Y160M-4 | 11 | 0.8 |
| PCΦ500×350 | ≤210 | ≤25 | 12-20 | Y180M-4 | 18.5 | 1.2 |
| PCΦ600×400 | ≤250 | ≤30 | 15-30 | Y180L-4 | 22 | 1.5 |
| PCAΦ800×600 | ≤300 | ≤30 | 25-50 | Y250M-4 | 55 | 2 |
| PCΦ800×600 | ≤200 | ≤25 | 20-50 | Y280M-6 | 55 | 2.6 |
| PCΦ1000×800 | ≤300 | ≤35 | 30-65 | Y315S-6 | 75 | 4 |
| PCΦ1000×1000 | ≤300 | ≤35 | 45-80 | Y315M-6 | 90 | 6 |
| PCH0606 | ≤200 | ≤15 | 18-30 | Y132M-6 | 30 | 2 |
| PCH0808 | ≤250 | ≤15 | 30-50 | Y280S-6 | 45 | 4.5 |
| PCH1010 | ≤300 | ≤15 | 45-80 | Y315M-6 | 90 | 6.5 |
Note: If there is change of the above specification, it subjects to the newest products' specifications.